Alpine CDE-HD137BT Owners Manual (english) - Page 36

Flash Memory Connection (optional) Connect Flash Memory 1 Open the cover of the USB Port. 2 Connect the Flash Memory directly to the USB Port, or via the USB cable. This unit USB Connection Terminal Flash Memory (sold separately) or iPod/iPhone (optional) SOURCE Rotary encoder/ /ENTER  ABC SKIP 1 2 45 Preset buttons (1 through 6) Flash Memory Cable (sold (sold separately) separately) Remove Flash Memory 1 Carefully, pull out the Flash Memory Device from the USB cable or the USB Port. 2 Close the cover of the USB Port. Notes • Change to a source other than the Flash Memory mode, and then remove the Flash Memory Device. If Flash Memory is removed while its contents are playing, data may be damaged. • When removing Flash Memory, pull it out straight. • If sound is not output or Flash Memory is not recognized even when connected, remove the Flash Memory Device once, and then reconnect. • After removing the Flash Memory, close the cover of the USB Port to prevent dust or foreign objects from entering and causing a malfunction. About MP3/WMA/AAC File of Flash Memory Playing back MP3/WMA/AAC MP3 files are prepared, and then stored to a Flash Memory Device. This unit can recognize at most 100 folders and 100 files per folder stored in Flash Memory. Playback may not be performed if a Flash Memory Device exceeds the limitations described above. Do not make a file's playback time more than 1 hour. Media supported Only MP3/WMA/AAC files are supported. Other media types are ignored. Corresponding File Systems This device supports FAT 12/16/32 for Flash Memory formats. 36-EN Connecting an iPod/iPhone An iPod/iPhone can be connected to this unit by using the Interface cable for iPod (included with iPod). When an iPod/iPhone is connected to this unit, you can choose to control the iPod/iPhone using its own controls or by the head unit controls. For details, refer to "Setting the iPod Control" on page 37. This unit USB Connection Terminal iPod/iPhone (sold separately) Included with iPod/iPhone Notes • An iPhone connected to this unit operates as an iPod. The iPhone can be used as a hands-free device using the integrated Bluetooth module. • Internet and telephone functions of iPod touch or iPhone, etc., can also be used when connecting to the unit. However, using these functions will stop or pause the playing songs, at this time do not operate the unit to avoid a malfunction. About iPod/iPhone models usable with this unit • Confirmed devices regarding Made for iPod. Correct function of earlier versions cannot be guaranteed. iPod touch (4th generation): Ver.4.3 iPod nano (6th generation): Ver.1.0.0 iPod touch (3rd generation): Ver.4.3 iPod nano (5th generation): Ver.1.0.2 iPod classic (160 GB) (Late 2009): Ver.2.0.4 iPod touch (2nd generation): Ver.4.2.1 iPod nano (4th generation): Ver.1.0.4 iPod classic (120 GB): Ver.2.0.1 iPod touch (1st generation): Ver.3.1.3 iPod nano (3rd generation): Ver.1.1.3 iPod classic (80 GB, 160 GB): Ver.1.1.2 iPod nano (2nd generation): Ver.1.1.3