Alpine D900 Owners Manual - Page 24

About the Time Correction The distance between the listener and the speakers in a car vary widely due to the special conditions of the mobile environment. This difference in the distances from the speakers to the listener creates a shift in the sounds image and frequency characteristics. This is caused by the time delay between the sound reaching the listener's right versus left ear. To correct this, the IVA-D900 is able to delay the audio signal to the speakers closest to the listener. This effectively creates a perception of increased distance for those speakers. The listener can be placed at an equal distance between the left and right speakers for optimum staging. The adjustment will be made for each speaker in a step of 0.1 ms. Example 1. Listening Position: Front Left Seat Adjust the time correction level of the front left speaker to a high value and the rear right to zero or a low value. 0.5m 2.25m ∗ 5.1ms ∗ Tips * Subwoofer speaker You cannot change the time correction value for the subwoofer, but you can set the subwoofer's apparent position to the front by adjusting the time correction value of the front and rear speakers. For details, refer to the "Tips" on page 23. Here we calculate the time correction value for the front left speaker in the diagram above. Conditions: Farthest Speaker - listening position: 2.25 m (88-9/16") Front left speaker - listening position: 0.5 m (19-11/16") Calculation: L = 2.25 m - 0.5 m = 1.75 m (68-7/8") Time correction = 1.75 ÷ 343* × 1000 = 5.1 (ms) * Speed of sound: 343 m/s (765 mph) at 20˚C The sound is not balanced because the distance between the listening position and the various speakers is different. The difference in distance between the front left speaker and the rear right speaker is 1.75 m (68-7/8"). Time correction eliminates the differences in the time required for the sound to reach the listening position. The time of the front left speaker is corrected by 5.1 ms so that its sound reaches the listening position at the same time as the sound of other speakers. In other words, giving the front left speaker a time correction value of 5.1 ms makes it seem as if the distance to the front left speaker is the same as the distance to the farthest speaker. Example 2. Listening Position: All Seats Adjust the time correction level of each speaker to almost the same level. 1 Sit in the listening position (driver's seat, etc.) and measure the distance (in meters) between your head and the various speakers. 2 Calculate the difference between the distance to the farthest speaker and the other speakers. L = (distance to farthest speaker) - (distance to other speakers) 3 Divide the distances calculated for the speakers by the speed of sound (343 m/s (765 mph) at 20˚C). These values are the time correction values for the different speakers. Bass Focus Setting item: BASS FOCUS Setting contents: TIME DN / UP / FRONT / LEFT / RIGHT / REAR The time difference between the front-rear/left-right speakers, can be adjusted at the same time. With an initial delay of 0.1 ms for each of the 0 to 99 steps, audible time correction can be done. Selecting the speaker: Select the speaker among 3 (FRONT) through 6 (REAR). Setting the step: Press 1 (TIME ;DN) or 2 (TIME UP:) to set the step. • Any manual time correction adjustments will also affect corrections made for bass focus. Time Difference Table Number of Steps 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Time Difference (ms) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 Number of Steps 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Time Difference (ms) 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Number of Steps 28 29 30 31 32 33 34 35 36 37 38 39 40 - 98 99 Time Difference (ms) 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 - 9.8 9.9 22-EN