Alpine D900 Owners Manual - Page 39

To activate your auxiliary devices: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1. Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2. Keep pushing the foot brake and release the parking brake once then engage it again. 3. When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the AUX mode operation has been released. Engaging the parking brake can reactivate the AUX mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of "To activate your auxiliary devices." Each time the ignition is turned OFF, perform the procedure of "To activate your auxiliary devices." • If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY. 1 Press SOURCE/POWER. The main menu screen appears on the display. 2 Turn the Rotary encoder and select "AUX," then press the Rotary encoder to execute the selection. • If the AUX mode is not displayed on the main menu, set AUX IN to LEVEL LOW or HIGH by following "Setting the AUX mode" (page 33). Changer (Optional) 4 3 5 2 6 1 7 Rotary encoder BAND SOURCE/POWER Controlling CD Changer (Optional) An optional 6-disc or 12-disc CD Changer may be connected to the IVA-D900 if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the IVA-D900, the CD Changer will be controllable from the IVA-D900. If you connect a changer compatible with MP3, you can play CD- ROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D900. Using the KCA-400C (the Multi-Changer Switching device) multiple changers can be controlled by the IVA-D900. See the Multi-Changer Selection section for selecting the CD Changers (page 38). 1 Press SOURCE/POWER to display the main menu. 2 Turn the Rotary encoder to select "CD CHG," then press the Rotary encoder. The display changes to the CD changer mode screen. 3 When a 6 Disc CD Changer is connected; 1 Press 7 (PAGE 1/2). The Function Guide display changes. 2 Press the Function buttons to select your desired disc loaded. The Function buttons 1 (DISC1) through 6 (DISC6) select the discs from the first disc to 6th disc. When an MP3 compatible CD changer is connected; 1 Press 7 (PAGE 1/3) twice to change the Function Guide display. 2 Press the Function buttons to select your desired disc among the loaded ones. The Function buttons 1 (DISC1) through 6 (DISC6) select the discs from the first disc to 6th disc. Continued 37-EN