Alpine D900 Owners Manual - Page 74
Remote Control Input Lead White/Brown, Right Front + Speaker Output Lead Gray
UPC - 793276200310
View all Alpine D900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
1 Antenna Extension Cable 2 Digital Output Terminal (Optical) Use when combining fiber digital input compatible products. 3 Remote Control Interface Connector Connect to the remote control interface box. 4 Power Supply Connector 5 DC/DC Converter • Do not install the converter at a location subjected to water such as under the floor mat or air conditioner. This may cause a malfunction. • Do not bundle the DC/DC converter cable with other audio cables. Doing so may induce noise into your system. • Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast. 6 Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. 7 Fuse Holder (10A) 8 Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. 9 Remote Control Output Lead (White/Brown) Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control. ! Remote Control Input Lead (White/Brown) Connect the external Alpine product to the remote control output lead. " Reverse Lead (Orange/White) Use only when a back-up camera is connected. Connect to the plus side of the car's reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the back-up camera. This is linked with putting the car into reverse (R). # Display Output Terminal $ Remote IN/OUT Terminal % Ai-NET Connector Connect this to the output or input connector of other product (CD Changer, Equalizer, etc.) equipped with AiNET. & Antenna Receptacle ( System Switch When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position. • Be sure turn the power off to the unit before changing the switch position. ) Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor. ~ Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. + Audio Interrupt In Lead (Pink/Black) , Parking Brake Lead (Yellow/Blue) Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the IVA-D900. - Foot Brake Lead (Yellow/Black) Connect to the vehicle's foot brake lead or brake lamp lead. . Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. / Fuse Holder (15A) : Right Front (+) Speaker Output Lead (Gray) ; Right Front (-) Speaker Output Lead (Gray/Black) < Right Rear (-) Speaker Output Lead (Violet/Black) = Right Rear (+) Speaker Output Lead (Violet) > Left Rear (+) Speaker Output Lead (Green) ? Left Rear (-) Speaker Output Lead (Green/Black) @ Left Front (-) Speaker Output Lead (White/Black) [ Left Front (+) Speaker Output Lead (White) \ Monitor Extension Cable (Included) ] Subwoofer output Terminal Connect the input lead of an amplifier for the subwoofer to this terminal. ^ Rear output Terminal Use when connecting an amplifier. _ Front output Terminal Use when connecting an amplifier. To prevent external noise from entering the audio system. • Locate the unit and route the leads at least 10 cm away from the car's electrical harness. • Keep the battery power leads as far away from other leads as possible. • Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information. • Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information. 72-EN