Alpine D900 Owners Manual - Page 38

Navigation System (Optional) Auxiliary Device (Optional) Rotary encoder V.SEL SOURCE/POWER Rotary encoder SOURCE/POWER Controlling the Navigation System (Optional) Operating Auxiliary Devices (Optional) If an optional Alpine Navigation System is connected to the IVAD900, some of its functions can be controlled from the IVA-D900. 1 Press SOURCE/POWER. The main menu screen appears on the display. 2 Turn the Rotary encoder and select "NAV.", then press the Rotary encoder to execute the selection. The Function Guide display changes to show the same button names as those for the remote control supplied. • When V. SEL is pressed while the Navigation selection mode is being selected in the VISUAL setting (refer to page 32), the navigation mode will be directly activated. • If the Navigation mode menu is not displayed on the main menu screen, set NAV. IN to on by following "Setting the navigation mode" (page 33). • If you use the buttons displayed, you can control the navigation system from IVA-D900 in the similar way to the remote control operation. For operation, refer to the Owner's Manual for your navigation system. • Depending on the navigation system connected to this unit, some functions and displays may vary. • When the Navigation System is on, the audio and visual navigation cuts in. To operate your devices connected to the AUX terminals on the rear panel of IVA-D900, follow the procedure described below. WARNING It is dangerous (and illegal in many states) for the driver to watch the TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the IVA-D900 correctly so that the driver cannot watch TV/Video unless the vehicle is stopped and the emergency brake is applied. If the IVA-D900 is not installed correctly, the driver will be able to watch the TV/Video while driving the vehicle and may be distracted from looking ahead and cause an accident. The driver or other people could be severely injured. 36-EN