Alpine X409-WRA-JL Installation Manual - Page 27
Setting Up OEM Aux Switches
View all Alpine X409-WRA-JL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Jeep Wrangler X409-WRA-JL 20200825v1 27/29 Setting Up OEM Aux Switches 1 Once in the setup menu (see page 28) select SYSTEM and then MAESTRO MODULE. 2 Select VEHICLE FEATURES. 3 Select AUX SWITCHES. 4 Select the switch that you would like to edit (AUX 1, AUX 2, AUX 3, or AUX 4). 5 Select the setting you would like to edit (TYPE, POWER SOURCE, or RECALL LAST STATE). 6 TYPE can be set for either LATCHING or MOMENTARY. LATCHING means that when the switch is selected it will stay on until the switch is pressed again. MOMENTARY will only keep the switch on as long as the button is held in. 7 RECALL LAST STATE when set to ON the state of the switch is retained across ignition cycles. 8 POWER SOURCE menu can be set for either BATTERY or IGNITION. BATTERY means the switch has power to it at all times. IGNITION means it has power only when the vehicle is on. 1 2 3 4 5 6 7 8