Alpine iLX-407 Owners Manual English - Page 33

Presetting Stations Manually 1 Tune in a desired radio station you wish to store in the preset memory by manual or automatic seek tuning. 2 Touch and hold the Preset number you want to store for at least 1 second. The selected station is stored. 3 Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the desired band and repeat the procedure. A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 or AM). • If a preset memory has already been set in the same preset number, it will be cleared and the new station will be memorized. Presetting Stations Automatically The tuner can automatically seek and store 6 strong stations in the selected band in ascending order of frequency. Select the desired band then touch and hold [A.Memo]. The tuner automatically seeks and stores 6 strong stations into the preset buttons in ascending order of frequency. When automatic storing has completed, the station stored in the preset 1 is selected. • If no stations are stored, the tuner will return to the original station you were listening to before the automatic storing procedure began. • You can cancel this process by touching [A.Memo] while the tuner is automatically seeking stations. Canceling will return the tuner preset to the previous setting. Tuning to Preset Station Receiving a Multicast (HD Radio™ Mode only) Multicasting is the ability to broadcast multiple program streams over a single FM frequency. This increases the amount and diversity of content choices. A maximum of 8 multicast station channels can be selected on this unit. • Multicast station channels indicator appears when signal reception is possible. Touch [ ], [ ] or [ ], [ ]. The sub channel of the received radio station is changed. Forced Analog Mode Activate the Compulsory Analog Radio mode to receive only analog radio signals. Touch [Analog mode]. The [Analog mode] button is highlighted. To cancel Compulsory Analog Radio mode, touch [Analog mode] again. • During Forced Analog mode, only analog broadcasts will be received even when digital broadcasts become available. Selecting the Receivable Program Type (RBDS FM Radio Mode only) You can select and receive the currently receivable stations in the Program Type list screen. 1 Touch [PTY Search] The display shows the Program Type list screen. 2 Select the desired program type in the Program Type list screen. Program Type Seek starts and the receivable program type is received. If no Program Type station is found, "No program type available." will be displayed. After selecting the desired band, touch the desired preset button. The preset station is received. 33-EN