Apple IMAC Service Source - Page 10
General Information, Overview: November 2003, New Procedures, Tools - stand
UPC - 067540444435
View all Apple IMAC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
General Information Overview: November 2003 This Take Apart chapter includes take apart procedures for the 15-inch, the 17-inch, and the 20-inch iMac (USB 2.0) computers. New procedures for the 20-inch iMac (USB 2.0) are listed below. New Procedures The following Take Apart sections were updated: • 20-inch model: Display panel, inverter, back cover, and the neck assembly • Replacement instructions to add copper tape on the inside of the Faraday cage when you replace the antenna board on any of these models. • Replacement instructions for EMI gaskets on the 20-inch panel Tools The following tools are recommended for the take apart procedures. • The service stand (076-0898) • Thermal paste (922-4757) • Torque driver, 17" LB (076-0899) • 1.5 mm hex driver (for LCD bezel screws) • #0 Phillips screwdriver) • Torx screwdriver set (6, 8, 10, 15) • Plastic flatblade screwdriver or stylus (922-5065) • Needlenose pliers • ESD wriststrap and mat General Information iMac (USB 2.0) Take Apart - 1