Apple IMAC Service Source - Page 102
Replacing the EMI Panel Gaskets, Tools, Procedure, top, the back and to both sides of the panel.
UPC - 067540444435
View all Apple IMAC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Replacing the EMI Panel Gaskets The following instructions explain how to replace the EMI gaskets on the iMac (USB 2.0) 20-inch panel. Note: If the gasket kit (076-1059) does not come with the replacement panel, remove the gaskets from the defective panel and place them on the new panel. Tools • No tools are required unless you are reusing the gaskets. A nylon probe tool would be required to peel the gaskets off the original panel. Procedure 1. The iMac (USB 2.0) 20-inch panel (shown below) has EMI gaskets attached to the top, the back and to both sides of the panel. Important: Gaskets need to be installed on the replacement panel. 2. Attach the five small EMI gaskets (circled) across the top of the replacement panel. The black mylar tape shown below is attached last, and is discussed in step 5. Display, 20" Flat Panel iMac (USB 2.0) Take Apart - 93