Asus A7V8X A7V8X User Manual - Page 22

Core specifications - x cpu support

Get Asus A7V8X PDF manuals and user guides View all Asus A7V8X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

1.4.2 Core specifications 1 North bridge controller. The VIA® KT400 supports AGP 8X mode, 266/200MHz Front Side Bus, and the latest 400/333/266/200MHz 64-bit memory bus. 2 CPU socket. Socket 462 (Socket A) surface mount, Zero Insertion Force (ZIF) socket for the AMD Athlon XP/Athlon/Duron Processors, with 600 MHz ~ 2.4GHz system bus. (Note: When using 333MHz FSB CPU, system memory supports DDR333 or DDR400 only.) TABLE 1.4.2 FSB/DDR Support Table FSB 200/266 MHz DDR 266 DDR 333 DDR 400 333 MHz 3 DDR DIMM sockets. These three 184-pin DIMM sockets support up to 3GB system memory using unbuffered non-ECC PC2100/1600 DDR DIMMs.(Note: PC2700 maximum to 2 DIMM support only. PC3200 maximum to 1 DIMM support only.) Visit the ASUS website (www.asus.com) for the latest qualified DDR400 module list. 4 ATX power connector. This 20-pin connector connects to an ATX +12V power supply. The power supply must have at least 1A on the +5V standby lead (+5VSB). 5 Floppy disk connector. This connector accommodates the provided ribbon cable for the floppy disk drive. One side of the connector is slotted to prevent incorrect insertion of the floppy disk cable. 6 IDE connectors. These dual-channel bus master IDE connectors support up to four Ultra DMA133/100/66, PIO Modes 3 & 4 IDE devices. Both the primary (blue) and secondary (black) connectors are slotted to prevent incorrect insertion of the IDE ribbon cable. 7 AGP warning LED. Serving as a smart burn-out protection for the motherboard, this red LED lights up if you plug in any 3.3V AGP card into the AGP slot. When this LED is lit, there is no way you can turn on the system power even if you press the power button. 8 South bridge controller. The VIA® VT8235 integrated peripheral controller supports various I/O functions including, 2-channel ATA/ 133 bus master IDE controller, up to six USB 2.0 ports, LPC Super I/O interface, AC'97 interface and PCI 2.2 interface. 1-8 Chapter 1: Product introduction

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
1-8
Chapter 1: Product introduction
North bridge controller.
The
VIA
®
KT400
supports AGP 8X mode,
266/200MHz Front Side Bus, and the latest 400/333/266/200MHz
64-bit memory bus.
CPU socket.
Socket 462 (Socket A) surface mount, Zero Insertion
Force (ZIF) socket for the AMD Athlon XP/Athlon/Duron
Processors, with 600 MHz ~ 2.4GHz
system bus. (
Note:
When
using 333MHz FSB CPU, system memory supports DDR333 or
DDR400 only.
)
DDR DIMM sockets.
These three 184-pin DIMM sockets support up
to 3GB system memory using unbuffered non-ECC PC2100/1600
DDR DIMMs.(
Note:
PC2700 maximum to 2 DIMM support only.
PC3200 maximum to 1 DIMM support only.
)
Visit the ASUS website (www.asus.com) for the latest qualified DDR400 module list.
ATX power connector.
This 20-pin connector connects to an ATX
+12V power supply. The power supply must have at least 1A on the
+5V standby lead (+5VSB).
Floppy disk connector.
This connector accommodates the
provided ribbon cable for the floppy disk drive. One side of the
connector is slotted to prevent incorrect insertion of the floppy disk
cable.
IDE connectors.
These dual-channel bus master IDE connectors
support up to four Ultra DMA133/100/66, PIO Modes 3 & 4 IDE
devices. Both the primary (blue) and secondary (black) connectors
are slotted to prevent incorrect insertion of the IDE ribbon cable.
AGP warning LED.
Serving as a smart burn-out protection for the
motherboard, this red LED lights up if you plug in any 3.3V AGP
card into the AGP slot. When this LED is lit, there is no way you
can turn on the system power even if you press the power button.
South bridge controller.
The
VIA
®
VT8235
integrated peripheral
controller supports various I/O functions including, 2-channel ATA/
133 bus master IDE controller, up to six USB 2.0 ports, LPC Super
I/O interface, AC’97 interface and PCI 2.2 interface.
8
7
6
5
4
2
1
1.4.2
Core specifications
FSB
DDR 266
DDR 333
DDR 400
200/266 MHz
333 MHz
3
TABLE 1.4.2
FSB/DDR
Support
Table