Asus A7V8X A7V8X User Manual - Page 40
Jumpers - x bios
View all Asus A7V8X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2.7 Jumpers 1. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default value is [Disabled]). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see section 4.5.1 Power Up Control). KBPWR1 12 23 +5V +5VSB ® A7V8X (Default) A7V8X Keyboard Power Setting 2. VCORE over-voltage (3-pin OVER_VOLT1) When enabled, this jumper allows CPU VCORE ranges of 1.7V to 2.05V. When this jumper is disabled, VCORE setting has a range of +1.5V to +1.85V. You may adjust the CPU VCORE through the BIOS Setup. Setting to a very high core voltage may cause permanent damage to the CPU. It is recommended that you keep the default setting (Disable). OVER_VOLT1 12 23 OVERVOLT ENABLE OVERVOLT DISABLE (Default) ® A7V8X A7V8X CPU Over Voltage Setting 2-14 Chapter 2: Hardware information