Asus AP3000 Hardware Reference - Page 32

IV. Hardware Setup • 4-11. SCSI Backplane The SCSI backplane of this server is comprised of one SCSI board (DABP5) with Ultra2 SCSI connectors, power inputs, and SCSI ID dip switches. This configuration allows Ultra2 SCSI SCA hard disk drives to be docked into the server. The SCSI board (DA-BP5) does not have auto termination, therefore the included terminator block must be used on the end connector. SCSI Backplane Front Side SCSI ID Select DIP Switches PWR3 Connector Connects to a SCSI controller through the Ultra2 cable IV. Hardware Setup SCSI Backplane PWR2 Connector PWR1 Connector SMB Out SCSI Backplane Back Side SMB In Fan Connector 1.6" Tray Connector #5B 1.6" Tray Connector #3B 1.6" Tray Connector #1 The provided terminator must be placed on this bottom SCSI connector. 1" Tray Connector #5 1" Tray Connector #4 Fan Control Board Connector 1" Tray Connector #3 1" Tray Connector #2 1" Tray Connector #1 32 AP 3000 Hardware Reference Guide