Asus AP3000 Hardware Reference - Page 34

IV. Hardware Setup SCSI ID Dip Switches (Cont') IDSEL1 IDSEL0 Slot1 Slot3B Slot5B ON IDSEL 1=off IDSEL 0=off off off Resv. ON IDSEL 1=on IDSEL 0=on on on 15 11 3 ON IDSEL 1=on on off 14 6 1 IDSEL 1=off ON IDSEL 1=off IDSEL 0=on off on 13 5 0 NOTE All SCSI devices must have a SCSI identification number that is not in use by any other SCSI device. SCSI devices vary in how they set the ID number. Refer to the product manual for any additional devices that you may install for details on how to set its ID number. • 4-13. Expansion Card Guide The chassis provides an adjustable expansion card guide to help hold expansion cards in their slots. Knob Metal Arm Securing Expansion Card Guide The expansion card guide is mounted by four screws on the top and bottom edge of the chassis. There are 18 knobs on the stabilizer. Turn the knob over the appropriate expansion card counterclockwise to extend the metal arm under each knob. Keep turning until the arm is firmly pressed against the expansion card. Turn the knob clockwise to retract the metal arm. IV. Hardware Setup Expansion Card Stabilizer 34 AP 3000 Hardware Reference Guide