Asus AZCRB LSI MegaRAID User Manual English and Traditional-Chinese Edition
Asus AZCRB Manual
View all Asus AZCRB manuals
Add to My Manuals
Save this manual to your list of manuals |
Asus AZCRB manual content summary:
- Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 1
LSI MegaRAID User's Manual Q2143 August 2005 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 2
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 3
Table of Contents LSI MegaRAID Userʼs Manual About This Manual ii Chapter 1: RAID Setup 1-1 1.1 Change the Speed of SCSI Channel 1-1 1.2 RAID 0 or RAID 1 Setup 1-3 1.3 RAID 5 Setup 1-9 1.4 RAID 50 Setup 1-15 1.5 RAID 10 Setup 1-21 1.6 Rebuild - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 4
Chapter 2: Setup for Operation Systems This chapter will guide you throught the relevant settings after entering the operation systems. Special Messages This manual uses the following icons to call your attention to specific instructions or explanations. Warning: Provides messages of high importance - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 5
LSI MegaRAID Userʼs Manual Important: Important tips or things to be paid attention to. Note: Tips, definitions, or further explanations More Information about This Product You could get, via the following two media, information about the ASUS products you are using as well as the upgrade information - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 6
- Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 7
1 RAID Setup With step-by-step descriptions, this chapter introducess the procedures of setting up a RAID on your system at the time when system is powered on and not yet enters the operation system. - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 8
LSI MegaRAID Userʼs Manual 1.1 Change the Speed of SCSI Channel 1. Press Ctrl + H at the same time and enter the MegaRAID WebBIOS configuration window. Select with your mouse or - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 9
LSI MegaRAID Userʼs Manual 3. Click on the arrow of SCSI Capabilities box and open the drop down menu. The four speed selections are Fast, Ultra, Ultra-II, U160, and - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 10
LSI MegaRAID Userʼs Manual 1.2 RAID 0 or RAID 1 Setup 1. Press at the same time Ctrl + H and enter the MegaRAID WebBIOS configuration window where information about all physical drivers installed - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 11
LSI MegaRAID Userʼs Manual 3. If the setting is to meet special requirements, please click on Custom Configuration. You could also let the Configuration Wizard to set up a - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 12
LSI MegaRAID Userʼs Manual 5. In the right side windows you could view the information of all RAIDs (arrays). Click Accept Array and Next to continue. 6. For RAID 0 configuration, - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 13
LSI MegaRAID Userʼs Manual 7. For RAID 1 configuration, set the RAID Level as RAID 1, and input the RAID 1 size value within the circled area into the Select Size box ( - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 14
9. Click Yes to save the setup. LSI MegaRAID Userʼs Manual 10. Click Yes to initialize the new logical drives. 1-7 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 15
LSI MegaRAID Userʼs Manual 11. If no boot device is ever set, please select Set Boot Drive and then select Go to change the settings so that the RAID storage devices could become the first boot device. 1-8 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 16
1.3 RAID 5 Setup LSI MegaRAID Userʼs Manual 1. Press at the same time Ctrl + H and enter the MegaRAID WebBIOS configuration window where information about all physical drivers installed is displayed. Click Confi - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 17
LSI MegaRAID Userʼs Manual 3. If the setting is to meet individual requirements, please select Custom Configuration. You could also let the Configuration Wizard set up a RAID automatically - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 18
LSI MegaRAID Userʼs Manual 5. This warning window will prompt out when hard disks of different sizes are deployed in a RAID. If hard disks of identical space are used, this - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 19
LSI MegaRAID Userʼs Manual 7. Set RAID Level as RAID 5 and input the Select Size box with the RAID 5 size value within the circled area. 8. You could see information of all RAID settings in the left side window. Click Accept to continue. 1-12 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 20
LSI MegaRAID Userʼs Manual 9. Click Yes to save the configuration, or click No to cancel the settings. 10. Click Yes to initialize the new logical drives. 1-13 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 21
LSI MegaRAID Userʼs Manual 11. If no boot device is ever set, please select Set Boot Drive and then click Go to change the settings so that the RAID storage device could become the first boot device. 1-14 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 22
1.4 RAID 50 Setup LSI MegaRAID Userʼs Manual 1. Press at the same time Ctrl + H and enter the MegaRAID WebBIOS configuration window where information about all physical drivers installed is displayed. Click Confi - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 23
LSI MegaRAID Userʼs Manual 3. If the setting is to meet individual requirements, please select Custom Configuration. You could also let the Configuration Wizard to set up a RAID - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 24
LSI MegaRAID Userʼs Manual 5. The three disks are now set as Array 1. Click Accept Array to continue. 6. Then set the rest three hard disks as Array 2 and click Accept Array. Press Next to continue. 1-17 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 25
LSI MegaRAID Userʼs Manual 7. Select Array 1 and set the RAID Level as RAID5 and Span as Enabled. Then input the RAID 5 size value with spanning in the circled area - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 26
9. Click Yes to save the configuration. LSI MegaRAID Userʼs Manual 10. Click Yes to initialize the new logical drives. 1-19 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 27
LSI MegaRAID Userʼs Manual 11. If no boot storage device is ever set, please select Set Boot Drive and then select Go to change the settings so that the - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 28
1.5 RAID 10 Setup LSI MegaRAID Userʼs Manual 1. Press Ctrl + H at the same time and enter the MegaRAID WebBIOS configuration window, where information about all physical drivers installed is displayed. Click Confi - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 29
LSI MegaRAID Userʼs Manual 3. If the setting is to meet individual requirements, please select Custom Configuration. You could also let the Configuration Wizard set up a RAID automatically - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 30
LSI MegaRAID Userʼs Manual 5. Select two hard disks as and set them as Array1, and the rest Array 2. At least two hard disks are needed for setting up RAID 1, - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 31
LSI MegaRAID Userʼs Manual 7. You could now see information of all RAID settings. When you have finished the setting for Array 1 and Array 2, please click Next to continue. 8. Set - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 32
LSI MegaRAID Userʼs Manual 9. You could then see the information of RAID settings in the Configuration Preview window. The two arrays form a RAID 10, with the Array 2 being the continuance of the Array 1. 10. Click Yes to save the settings, or to click No to cancel the configuration. 1-25 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 33
LSI MegaRAID Userʼs Manual 11. Click Yes to initialize the new array of Logical Drives. 12. If no boot device is ever set, please select Set Boot Drive and then select Go to change the settings so that the RAID storage device could become the first boot device. 1-26 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 34
1.6 Array Rebuild LSI MegaRAID Userʼs Manual 1. When one of the hard disks within the array is removed and substituted with new disk, the array could automatically start the rebuilding process. You - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 35
LSI MegaRAID Userʼs Manual 1.7 Migration Setup 1. If new hard disks are to be installed onto the SCSI backplane, please select Scan Devices to discover the disk first. Then you - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 36
1.8 Hotspare Setup LSI MegaRAID Userʼs Manual 1. Select a ready physical drive and set it as Hotspare. Note: The disks already set as a part of RAID (Online) could not be selected. 2. Select Make Hotspare and click Go to set this hard disk as Hotspare. 1-29 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 37
LSI MegaRAID Userʼs Manual 3. If it is to stop the Hotspare function, select Offline and click Go to cancel. 4. The hard disk assigned as Hotspare will be highlighted in pink characters, which means the Hotspare setting is completed. 1-30 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 38
1.9 Clear Arrays LSI MegaRAID Userʼs Manual 1. Press Ctrl + H at the same time and enter the MegaRAID WebBIOS configuration window, where information about all physical drivers installed is displayed. Click Confi - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 39
LSI MegaRAID Userʼs Manual 3. You could find no Logical Drivers in the right side window, which means the disk arrays have already been cleared. Click Accept to continue. 4. Click Yes and save the configuration. 1-32 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 40
LSI MegaRAID Userʼs Manual 5. In the right side windows, all the storage devices are listed in the Physical Drives window, while the Logical Drives window is blank. 1-33 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 41
- Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 42
2 System Setup This chapter will guide you throught the relevant settings after entering the operation systems. - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 43
LSI MegaRAID Userʼs Manual 2.1 Install Drives for Operation Systems The SCSI RAID procedures for these respective OS. 2.1.1 Microsoft® Windows® Insert the support CD with the label reading LSI MegaRAID SCSI 3200/320-1 320 & ASUS AZ CRB into your optical drive and open the Driver folder. There - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 44
LSI MegaRAID Userʼs Manual 2. When a screen as follows prompts out, press S to install driver for the operation system. 3. Insert the drive disk previously prepared into the floppy drive, and press Enter. 2-2 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 45
LSI MegaRAID Userʼs Manual 4. For Windows 2000®, please select LSI MAGARAID Product for Windows 2000 Driver 2003 Server®. Press S and select to install from the floopy disk. Then please follow the instructions of Windows® and complete the installation. DO NOT take out the floopy disk until the first - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 46
LSI MegaRAID Userʼs Manual 2.1.2 RedHat Linux® You could get access ASUS global website to download the *.zip driver. Unzip the file in Windows® OS and run the *.exe file, the driver would automatically write into the fl - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 47
LSI MegaRAID Userʼs Manual 3. Insert the drive disk into the floopy drive, and follow the instruction to proceed with the installation. Press Yes, and then press Enter. 4. Select fd0 to install from floopy drive. Select OK and press Enter. If a USB fl - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 48
LSI MegaRAID Userʼs Manual 5. The operating system now is reading from the drive disk in the floopy drive. 6. When the installation is completed, please select No and press Enter - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 49
LSI MegaRAID Q2143 August 2005 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 50
Intel Xeon Pentium Intel Windows MS-DOS Microsoft 1) 2) ©2005 LSI MegaRAID Q2143 V1.0 2005 07 II - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 51
V VI VI 1.1 SCSI 1-2 1.2 RAID 0 RAID 1 1-4 1.3 RAID 5 1-10 1.4 RAID 50 1-13 1.5 RAID 10 1-22 1.6 1-28 1.7 Migration 1-29 1.8 Hotspare 1-30 1.9 1-32 2.1 2.1.1 2.1.2 SCSI RAID 2-2 Windows 2-2 Red Hat Linux 2-5 LSI MegaRAID III - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 52
1. 2. Windows 3. RAID RAID IV - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 53
1. http://tw.asus.com 2. LSI MegaRAID V - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 54
VI - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 55
Windows RAID - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 56
LSI LSI WebBIOS Ctrl+H Copyright© AMERICAN MEGATRENDS, INC. Press to Run Configuration Utility Or press for WebBIOS. WebBIOS [Start] 1.1 1. Properties SCSI WebBIOS SCSI Channel 1-2 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 57
2. 320-1 320-0 320-2 3. SCSI Capabilities Fast Ultra Ultra-II U160 U320 Submit LSI MegaRAID 1-3 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 58
4. Termination Disabled Termination Submit Enabled 1.2 RAID 0 RAID 1 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 1-4 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 59
2. Next RAID New Configuration 3. Custom Configuration Auto Configuration Configuration Wizard RAID LSI MegaRAID 1-5 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 60
4. Accept Array RAID 1 2 Ready Drives RAID 1 2 RAID 0 2 5. RAID(Array) 1 Accept Array Next RAID 1-6 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 61
6. MB RAID RAID 0 RAID 1 Select Size Next RAID 0 Accept Next RAID Accept RAID 0 size = 70004 7. RAID 1 RAID 1 size RAID 1 size = 35002 MB Select Size Accept RAID Next LSI MegaRAID 1-7 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 62
8. Logical Drivers Accept RAID 9. Yes 1-8 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 63
10. Yes Initialize Logical Drives 11. Go RAID Set Boot Drive 1 LSI MegaRAID 1-9 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 64
1.3 RAID 5 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 2. Next RAID New Configuration 1-10 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 65
3. Custom Configuration Auto Configuration Configuration Wizard RAID 4. 3 Ready Drives Accept Array Array 1 RAID 5 RAID 5 3 LSI MegaRAID 1-11 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 66
5. RAID 6. Next RAID Array 1 1-12 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 67
7. RAID 5 Size = RAID 5 Accept Select Size 8. RAID Accept LSI MegaRAID 1-13 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 68
9. Yes No 10. Yes Initialize Logical Drives 1-14 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 69
11. Go RAID Set Boot Drive 1 LSI MegaRAID 1-15 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 70
1.4 RAID 50 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 2. Next RAID New Configuration 1-16 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 71
3. Custom Configuration Auto Configuration Configuration Wizard RAID 4. 6 Physical Drivers Ready RAID 50 6 8 10 LSI MegaRAID 1-17 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 72
5. Accept Array 3 3 Ready Drives Array 1 6. 3 Array 2 Accept Array Arrays Array 1 Array 2 Next 1-18 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 73
7. Array 1 RAID Enabled 5 Select Size Accept RAID 5 Span With spanning RAID RAID 5 Size = 7 1I37 1Z37 [Enable] Array 1 Configuration [Next] 8. 50 1L26 1Z26 RAID 5 R5=(size) Array 1 Array 2 Array 2 Array 1 [Spna] [Accept] RAID LSI MegaRAID 1-19 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 74
9. Yes 10. Yes Initialize Logical Drives 1-20 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 75
11. Go RAID Set Boot Drive 1 12. WebBIOS Physical Logical Drivers Array` RAID LSI MegaRAID 1-21 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 76
1.5 RAID 10 1. MegaRAID BIOS Physical Drivers Configuration Wizard RAID 2. Next RAID New Configuration 1-22 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 77
3. Custom Configuration Auto Configuration Configuration Wizard RAID 4. Accept Array RAID 10 4 2 Array 1 RAID 0 Ready Drives Array 2 LSI MegaRAID 1-23 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 78
5. RAID 6. Next Array 2 Array 1 1-24 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 79
7. Array 1 Select Size Next RAID 1 Span With Spannong RAID 1 Size = Enabled RAID 1 size Accept 7 1I37 1Z37 [Enable] Array 1 Configuration [Next] 8. 10 1L26 1Z26 RAID 1 R1=(size) Array 1 Array 2 Array 2 Array 1 [Spna] [Accept] RAID LSI MegaRAID 1-25 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 80
9. Yes No 10. Yes Initialize Logical Drives 1-26 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 81
11. Go RAID Set Boot Drive 1 LSI MegaRAID 1-27 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 82
1.6 1. Rebuild Progress MegaRAID WebBIOS 2. Rebuilding Progress Abort Go 1-28 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 83
1.7 Migration 1. SCSI backplane Scan Devices Physical Drivers Ready Logical Drivers Array Migration 2. A. RAID Migration only Array 1 1. Array RAID 2. RAID Migration RAID Migration only Go B. RAID Migration with addition Array [RAID Migration with addition] Go RAID LSI MegaRAID - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 84
1.8 Hotspare 1. Ready Physical Drives RAID Online Hotspare RAID 5 RAID 10 RAID 50 Hotspare RAID 1 RAID 2. Make Hptspare Go Hotspare 1-30 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 85
3. Hotspare 4. Go Hotspare Offline LSI MegaRAID 1-31 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 86
1.9 1. MegaRAID BIOS Physical Drivers Configuration Wizard 2. Clear Configuration Next 1-32 RAID array - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 87
3. Logical Drives Accept 4. Yes LSI MegaRAID 1-33 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 88
5. WebBIOS Physical Drivers Ready Logical Drivers 1-34 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 89
Windows RAID - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 90
RAID Microsoft Windows® 2000 Windows® Server 2003 RedHat Linux® SuSE Linux® OS Operating System 2.1.1 Windows LSI MegaRAID SCSI 320-0/320-1 320 & ASUS AZ CRB Driver Windows Driver\Windows\ Windows 2000 Windows 2003 64bit SCSI RAID Windows Windows 2000 MakeDisk.exe win2003 32bit MakeDisk.exe - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 91
LSI MEGARAID Products for Windows 2000 Driver Windows 2003 Server LSI MEGARAID Products for Windows 2003 (x86) Windows XP RAID 320-0 AZCRB [MegaRAID SCSI 320-0 controller] RAID 320-1 [MegaRAID SCSI 320-1 RAID controller] RAID 320-2 [MegaRAID SCSI 320- 2 RAID controller] LSI MegaRAID - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 92
6. Windows XP Windows 2003 Server Windows 7. Windows 2-4 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 93
2.1.2 Red Hat Linux Driver 9.0\Drivers\ [LSI MegaRAID] Red Hat SuSe 9.0 SCSI RAID \Driver\Linux\Redhat\2.10.8\Linux_2.10.8.2-1\Redhat and SuSe megaraid2-v2.10.8.2-rhl90-kernels.img Red Hat 9.0 *.exe MakeDisk.exe *.zip Windows 2. Linux dd Enter linux LSI MegaRAID 2-5 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 94
3. 4. Enter Yes 2-6 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 95
5. fd0 OK Enter USB 6. sda USB LSI MegaRAID 2-7 - Asus AZCRB | LSI MegaRAID User Manual English and Traditional-Chinese Edition - Page 96
7. No Enter Linux Yes Enter 34 2-8
LSI MegaRAID User’s Manual
Q2143
August 2005