Asus KFN32-D SLI SAS User Guide - Page 112
Rebuilding a RAID set
View all Asus KFN32-D SLI SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
5.2.5 Rebuilding a RAID set To rebuild a RAID set: 1. From the Array List, use the up or down arrow keys to select the RAID set you want to rebuild, then press . The RAID set details appear. NVIDIA RAID Utility Oct 5 2004 - Array List - Boot No No Id Status 4 Healthy 3 Healthy Vendor NVIDIA NVIDIA Array Model Name STRIPING XXX.XXG MIRRORING XXX.XXG [Ctrl-X]Exit [↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail 2. Press . 3. Use the up or down arrow keys to select the RAID set you want to rebuild, then press . A confirmation message appears. Array 1 : NVIDIA MIRROR XXX.XXG - Array Detail - RAID Mode: Striping Striping Width: 1 Striping Block: 64K Adapt Channel M/S 2 1 1 0 Master Master Index Disk Model Name 0 XXXXXXXXXXXXXXXXX 1 XXXXXXXXXXXXXXXXX Capacity XXX.XXGB XXX.XXGB [↑↓] Select [F6] Back [F7] Finish 4. Press to start rebuilding the array, or to cancel. The Array List screen displays the RAID set after rebuilding. Rebuild array? [Enter] OK [Esc] Cancel 5- Chapter 5: RAID configuration