Asus KFN32-D SLI SAS User Guide - Page 124
Managing Arrays
View all Asus KFN32-D SLI SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
5.3.3 Managing Arrays The LSI Logic MPT Setup Utility allows you to perform other tasks related to configuring and maintaining IM and IME volumes. Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array. Viewing volume properties To view volume properties 1. On the main menu, select RAID Properties. LSI Logic MPT Setup Utility Adapter Properties -- SAS1068 v6.05.06.00 (2006.01.16) Adapter PCI Slot PCI Address(Bus/Dev/Function) MPT Firmware Revision SAS Address Status Boot Order Boot Support RAID Properties SAS Topology Advanced Adapter Properties SAS1068 00 07:03:00 0.07.01.00-IR 00000007:00000008 Enabled 0 [Enabled BIOS & OS] Esc = Exit Menu Enter = Select Item F1/Shift1 = Help -/+ = Change Item 2. On the next screen that appears, select View Existing Array. LSI Logic MPT Setup Utility Select New Array Type -- SAS1068 v6.05.06.00 (2006.01.16) View Existing Array Create IM Volume Create IME Volume Create IS Volume Esc = Exit Menu Enter = Select Item View the existing configuration. Create Integrated Mirror Array of 2 disks plus an optional hot spare. Data on the primary disk may be migrated. Create Integrated Mirrored Enhanced Array of 3 to 8 disks including an optional hot spare. ALL DATA on array disks will be DELETED! Create Integrated Stripping array of 2 to 8 disks. ALL DATA on array disks will be DELETED! F1/Shift1 = Help -/+ = Change Item 5-20 Chapter 5: RAID configuration