Asus KFN32-D SLI SAS User Guide - Page 131
Global_Properties
View all Asus KFN32-D SLI SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
4. To remove the boot designator, move the cursor to the disk and press Alt+B. This controller will no longer have a disk designated as boot. 5. To change the boot disk, move the cursor to the new boot disk and press Alt+B. The boot designator will move to this disk. The firmware must be configured correctly in order for the Alt+B feature to work. 5.3.5 Global_Properties From the Setup Utility screen, press
ASUS KFN32-D SLI Series
5-27
4.
To remove the boot designator, move the cursor to the disk and press
Alt+B. This controller will no longer have a disk designated as boot.
5.
To change the boot disk, move the cursor to the new boot disk and
press Alt+B. The boot designator will move to this disk.
The firmware must be configured correctly in order for the Alt+B feature
to work.
5.3.5 Global_Properties
From the Setup Utility screen, press <Ctrl+C) to enter the LSI Logic
Configuration, then select Global Properties. The Global Properties menu
allows you to change related settings.
=================================================================
LSI Logic MPT Setup Utility
v6.05.06.00 (2006.01.16)
Adapter List
Global Properties
Adapter
PCI
PCI
PCI
PCI
FM Revision
Status
Boot
Bus
Dev
Fnc
Slot
Order
07
03
00
00
0.07.01.00-IR
Enabled
]
Esc = Exit Menu
F1/Shift1 = Help
=================================================================
SAS1068
0
Pause When Boot Alert Displayed
Sets whether to pause when the boot alert displays.
Configuration options: [Yes] [No]
=================================================================
LSI Logic MPT Setup Utility
v6.05.06.00 (2006.01.16)
Adapter List
Global Properties
Boot Information Display Mode
Support Interrupt
Restore Default
]
Esc = Exit Menu
F1/Shift1 = Help
[No]
[Display adapters & installed devices]
[Hook interrupt, the Default]
Pause When Boot Alert Displayed