Asus KFN32-D SLI SAS User Guide - Page 76
IDE Configuration
View all Asus KFN32-D SLI SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 4.3.5 IDE Configuration The items in this menu allow you to set or change the configurations for the IDE devices installed in the system. Select an item then press if you wish to configure the item. IDE Configuration OnBoard PCI IDE Controller Serial-ATA Devices nVidia RAID Setup Hard Disk Write Protect IDE Dectect Time Out (Sec) ATA(PI) 80Pin Cable Detection [Enabled] [Device 0/1/2] [Disabled] [35] [Host] DISABLED: disables the intergrated IDE Controller. PRIMARY: enables only the Primary IDE Controller. SECODARY: enables only the Secondary IDE Controller. BOTH: enables both IDE Controllers. OnBoard PCI IDE Controller [Enabled] Enables or disables primary IDE controllers. Configuration options: [Disabled] [Enabled] Serial-ATA Devices [Device 0/1/2] Enables or disables the SATA0/1/2 IDE Interfaces. Configuration options: [Disabled] [Device 0] [Device 0/1] [Device 0/1/2] Hard Disk Write Protect [Disabled] Enables or disables the hard disk wirte protection. This will be effective only if device is accessed through BIOS. Configuration options: [Disabled] [Enabled] 4-16 Chapter 4: BIOS setup