Asus M2N32-SLI Premium VISTA Edition M2N32-SLI Premium user's manual - Page 59
ATX power connectors 24-pin EATXPWR, 4-pin ATX12V, Chassis intrusion connector 4-1 pin CHASSIS
View all Asus M2N32-SLI Premium VISTA Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
8. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature. +5VSB_MB Chassis Signal GND M2N32-SLI PREMIUM CHASSIS (Default) M2N32-SLI PREMIUM Chassis intrusion connector 9. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. M2N32-SLI PREMIUM M2N32-SLI PREMIUM ATX power connector EATXPWR ATX12V GND +12V DC GND +12V DC +3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts ASUS M2N32-SLI Premium Vista Edition 2-31