Asus ME-99 ME-99 User Manual - Page 33
ASUS ME-99 User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, Wake On LAN, Wake-On-Ring Connector 2
View all Asus ME-99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3. HARDWARE SETUP 11) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7.1 ASUS PCI-L101 Fast Ethernet Card). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. 01 01 01 IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON Ground +5 Volt Standby PME ME-99 ® ME-99 Wake-On-LAN Connector 12) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that PWR Up On Modem Act is set to Enabled (see 4.5.1 Power Up Control). 3. H/W SETUP Connectors 01 01 01 WOR 1 2 ME-99 ® Ground PIXRI# ME-99 Wake-On-Ring Connector ASUS ME-99 User's Manual 33