Asus P2L-VM P2L-VM User Manual - Page 14

R III. INSTALLATION Jumpers III. INSTALLATION Installation Steps Before using your computer, you must complete the following steps: 1. Set Jumpers on the Motherboard 2. Install System Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software WARNING! Computer motherboards, baseboards and components, such as SCSI cards, contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components. 4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system. 1. Jumpers 1. VGA Interrupt Selection (INT_EN) and 2. VGA Setting (VGAEN) The INT_EN jumper allows you to set the VGA interrupt method. The default disables the chipset's internal interrupt routing. Some TV-Tuner or MPEG cards may require that the interrupt be assigned by the onboard chipset, in which case enable INT_EN. The VGAEN jumper allows you to enable or disable the onboard VGA. Disable the onboard VGA if you are using a VGA card on the expansion slot. P2L-VM/P2E-VM VGA Settings INT_EN 1 2 3 Disable (Default) VGAEN 1 2 3 Enable (Default) INT_EN 1 2 3 Enable Setting INT_EN Enable [2-3] Disable [1-2] (def) VGAEN 1 2 3 Disable Setting VGAEN Enable [1-2] (def) Disable [2-3] 14 ASUS P2L-VM/P2E-VM User's Manual