Asus P4S8X P4S8X User Manual - Page 108
Other FastBuild Utility Commands
View all Asus P4S8X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
5.4.5 Other FastBuild Utility Commands Command options 3-6 on the FastBuild™ Utility Main Menu are not required for setting up an array, but they are useful for reconfiguring an array: View Array (3): View the drive assignments of hard disks in an array. Delete Array (4): Deletes an array to reconfigure the system. Deleting an array does not remove information on the hard disks. If an array is deleted by mistake, recover it immediately by redefining it as the deleted array. Rebuild Array (5): This command restores the array and system data after faults on RAID 1 arrays. Follow the steps below to rebuild and restore data in the array: 1. On boot-up, an error message notifies of a system failure. 2. Press keys to enter the FastBuild™Main Menu. 3. Select for View Array to verify the ID of the defunct hard disk. 4. Power off the system and replace the hard disk with an identical model. 5. Reboot and enter the FastBuild™ Main Menu again. 6. Select for Rebuild Array. The malfunctioning array is highlighted. Press to select it: 7. Select the replacement drive. Press : 90 Chapter 5: Software support