Asus P4S8X P4S8X User Manual - Page 44
Hardware information, Floppy disk drive connector 34-1 pin FLOPPY, CPU and, Chassis Fan - x cpu support
View all Asus P4S8X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
11. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). FLOPPY NOTE: Orient the red markings on P4S8X the floppy ribbon cable to PIN 1. ® PIN 1 P4S8X Floppy Disk Drive Connector 12. CPU and Chassis Fan Connectors (3 x 3-pin CHA_FAN,CPA_FAN, PWR_FAN) The two fan connectors support cooling fans of 350mA (4.2 Watts) or a total of 1A (12W) at +12V. Orient the fans so that the heat sink fins allow air flow to go across the onboard heat sinks instead of the expansion slots. The fan wiring and plug may vary depending on the fan manufacturer. Connect the fan cable to the connector matching the black wire to the ground pin. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! CPU_FAN PWR_FAN GND +12V Rotation GND +12V Rotation Rotation +12V GND P4S8X CHA_FAN ® P4S8X 12-Volt Fan Connectors 32 Chapter 2: Hardware information