Asus P4S8X P4S8X User Manual - Page 37
ASUS P4S8X motherboard user guide, Line out selector 2 x 2 pin FP_LO_SWR, FP_LO_SWL, Keyboard Wake
View all Asus P4S8X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Line out selector (2 x 2 pin FP_LO_SWR, FP_LO_SWL) (on audio models only) By default, these jumpers are shorted (jumper caps on) to route the signal from the audio controller to the rear panel Line Out jack to make it available for audio out devices like speakers or headphones. If you connect the Intel Front Panel audio cable to the FP_Audio connector, (see page 39 for the connector location) remove the caps from these jumpers to allow automatic switching of audio signals between the rear panel Line Out jack and the audio cable. P4S8X FP_LO_SWL BLOL FLOL FP_LO_SWR BLOR FLOR ® P4S8X Internal Line Out Selector 3. Keyboard Wake Up (3 pin KBPWR) This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing ) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Enable. (The computer will not power ON if you set this to Enable but do not have the correct ATX power supply. NOTE: This jumper must be set in conjunction with Wake On PS2 KB/PS2 Mouse/CIR in 4.5.1 Power Up Control. KBPWR 12 23 +5V +5VSB (Default) P4S8X ® P4S8X Keyboard Power Setting ASUS P4S8X motherboard user guide 25