Asus P4S8X P4S8X User Manual - Page 79
Chip Configuration
View all Asus P4S8X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4.4.1 Chip Configuration SDRAM Configuration [By SPD] This parameter allows you to set the optimal timings for items 2-5, depending on the memory modules that you are using. The default setting is [By SPD], which configures items 2-5 by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical information about the module, such as memory type, size, speed, voltage interface, and module banks. Configuration options: [User Defined] [By SPD] NOTE! The following 4 SDRAM parameters appear only when you set the SDRAM Configuration to [User Defined]. SDRAM CAS Latency [2.5T] This item controls the latency between the SDRAM read command and the time the data actually becomes available. SDRAM RAS to CAS Delay [3T] This item controls the latency between the SDRAM active command and the read/write command. SDRAM RAS Precharge Time [3T] This item controls the idle clocks after issuing a precharge command to the SDRAM. SDRAM RAS Active Time [6T] This item controls the number of SDRAM clocks used for SDRAM parameters. ASUS P4S8X motherboard user guide 63