Asus SK8N SK8N User Manual - Page 44
Hardware information, CPU, Power and Chassis Fan Connectors, pin CPU_FAN1, PWR_FAN1,
View all Asus SK8N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5. CPU, Power and Chassis Fan Connectors (3-pin CPU_FAN1, PWR_FAN1, CHA_FAN1) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! SK8N PWR_FAN1 CPU_FAN1 GND +12V Rotation GND +12V Rotation ® SK8N 12-Volt Fan Connectors CHA_FAN1 Rotation +12V GND 6. Serial Port 2 connector (10-1 pin COM2) This connector accomodates a second serial port using a serial port bracket. Connect the bracket cable to this connector then install the bracket into a slot opening at the back of the system chassis. SK8N COM2 PIN 1 ® SK8N Serial COM2 Bracket The serial port bracket is purchased separately. 2-24 Chapter 2: Hardware information