Asus SK8N SK8N User Manual - Page 45
ASUS SK8N motherboard, ATX power connectors 20-pin ATXPWR, 4-pin ATX12V
View all Asus SK8N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7. ATX power connectors (20-pin ATXPWR, 4-pin ATX12V) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 20-pin ATXPWR1 connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU. • Do not forget to connect the 4-pin ATX +12V power plug. Otherwise, the system does not boot up. • Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 300W, or 350W for a fully configured system. The system may become unstable or may not boot up if the power is inadequate. SK8N ® ATX12V ATXPWR +12V DC GND +12V DC GND +12.0VDC +5VSB PWR_OK COM +5.0VDC COM +5.0VDC COM +3.3VDC +3.3VDC +5.0VDC +5.0VDC -5.0VDC COM COM COM PS_ON# COM -12.0VDC +3.3VDC SK8N ATX Power Connector ASUS SK8N motherboard 2-25