Asus Terminator A7VT400 Terminator A7VT400 User''s Manual for English - Page 29
Expansion card installation, Configuring an expansion card - terminator drivers
View all Asus Terminator A7VT400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2.8.2 Expansion card installation To install a PCI or AGP card. 1. Place the chassis on its side. 2. Remove the metal bracket opposite the slot that you wish to use. 3. Align the card golden fingers to the slot and its metal bracket to the slot opening on the chassis. 4. Press the card firmly until it is properly seated on the slot. Metal bracket PCI slot (PCI1) 5. Secure the card to the chassis with a bracket screw. AGP slot (AGP1) 2.8.3 Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 5 for information on BIOS setup. 2. Install the software drivers for the expansion card. ASUS Terminator 1 A7VT400 2-13