Asus Terminator A7VT400 Terminator A7VT400 User''s Manual for English - Page 76
Primary IDE Master [Auto], Access Mode [Auto], PIO Mode [Auto]
View all Asus Terminator A7VT400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5.3.5 Primary and Secondary Master/Slave IDE Primary Master Primary IDE Master Access Mode Capacity Cylinder Head Sector PIO Mode UDMA Mode Transfer Mode [Auto] [Auto] 0 MB 0 0 0 [Auto] [Auto] None Select Menu Item Specific Help Press [Enter] to select. Primary IDE Master [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu. If automatic detection fails, this may be because the hard disk drive is too old or too new. If the hard disk was already formatted on an older system, Setup may detect incorrect parameters. In these cases, select [Manual] to manually enter the IDE hard disk drive parameters. Refer to the next section for details. Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Access Mode [Auto] This item allows the user to select the sector addressing mode. Configuration options: [CHS] [LBA] [Large] [Auto] PIO Mode [Auto] This option lets you set a PIO (Programmed Input/Output) mode for the IDE device. Modes 0 through 4 provide successive increase in performance. Configuration options: [Auto] [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4] 5-12 Chapter 5: BIOS information