Asus V2-PE3 V2-PE3 English Edition User's Manual - Page 57

GND +12V Rotation 4. CPU and Chassis Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350 mA~740 mA (8.88 W max.) or a total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. CHA_FAN ® CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM FAN Connectors Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! 5. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. ® USB+5V USB_P10USB_P10 GND NC USB+5V USB_P6USB_P6+ GND NC USB+5V USB_P9USB_P9+ GND USB 2.0 Connectors USB+5V USB_P5USB_P5+ GND USB56 1 USB78 1 Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB module is purchased separately. ASUS Vintage V2-PE3 4-7