Asus V2-PE3 V2-PE3 English Edition User's Manual - Page 74
SATA Channel 2, 3 Master
View all Asus V2-PE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
SATA Channel 2, 3 Master While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. Phoenix - Award BIOS CMOS Setup Utility SATA Channel 2 Master IDE Auto-Detection Extended IDE Drive Access Mode Capacity Cylinder Head Precomp Landing Zone Sector [Press Enter] [Auto] [Auto] 20021 MB 38792 16 0 38791 63 Select Menu Item Specific Help To auto-detect the HDD's size, head... on this channel : Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults Extended IDE Drive [Auto] Select [Auto] to automatically detect a SATA hard disk drive. If automatic detection is successful, Setup program automatically fills in the correct values for the remaining fields (including Capacity, Cylinder, Head, Precomp, Landing Zone, Sector) on this sub-menu. Configuration options: [None] [Auto] Access Mode [Auto] Allows the user to select the sector addressing mode. Configuration options: [Large] [Auto] Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. Capacity Displays the auto-detected hard disk capacity. This item is not configurable. Cylinder Shows the number of the hard disk cylinders. This item is not configurable. 5-12 Chapter 5: BIOS setup