Belkin F5D6050 User Manual - Page 19

Installing the Belkin SOHO Networking Software for Windows 98/Me The Belkin SOHO Networking Software provides a simple way to set up your Windows 98/Me computers for networking, file, and printer sharing. If you are familiar with TCP/IP and know how to configure the file and printer sharing, it is not necessary to use the Belkin SOHO Networking Software. Now that your wireless adapter drivers have been installed, you can configure the network. For each computer you connect to the network, you must assign a network address to be used by the other computers. Belkin has simplified this process by providing you with the Belkin SOHO Networking Software to configure your computers. Make sure that no other network adapters are installed in your computer before running the SOHO Networking Software. 1. Insert the SOHO Networking Software that came with your Belkin Network Adapter into your CD-ROM. 2. Click "Start", click "Run", and type "D:\NetSetup". ("D" is usually the default drive letter for the CD-ROM drive. If necessary, adjust drive letter to reflect your designated CD-ROM drive letter.) 3. Click "OK" and Windows will begin to install the program onto your PC. After the program is installed, Windows may ask you to restart your computer. Please do so. 4. Repeat these steps for each computer that you are connecting to your network. 5. Once you have installed the Belkin SOHO Networking Software on all of your computers, continue on to the next section. 17