Bernina Bernette 340 deco User Guide - Page 9
Getting ready to Embroider - by
View all Bernina Bernette 340 deco manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8 1 Getting ready to Embroider Removing the bobbin Slide the hook cover plate release button to the right, and remove the hook cover plate. Lift out the bobbin from the bobbin holder. 1. Hook cover plate release button 2. Hook cover plate 3. Bobbin 2 3 4 5 6 7 8 9 10 7 11 Setting the spool of thread Place the spool of thread on the spool pin with the thread coming off the spool as shown. Attach the large spool holder, and press it firmly against the spool of thread. 4. Large spool holder Note: Use the small spool holder to hold narrow or small spools of thread. 5. Small spool holder In order to prevent tangling of the thread, please use a spool net. The net is especially usefull to work from large or loose wound spools. 6. Spool Net Use the spool stand if the thread tangles around the root of the spool pin 7. Spool stand Extra spool pin Use the extra spool pin when you need to wind the bobbin without unthreading the machine while working on a project. When working with metallic thread the use of the extra spool pin is also highly recommended. Insert the extra spool pin into the spool stand then into the hole beside the horizontal spool pin. Place a cushion felt and spool on the spool pin. The end of the thread should unwind as illustrated. 8. End of the thread 9. Cushion felt 10. Extra spool pin 11. Hole To achieve the best embroidery quality, BERNINA recommends to use only high quality embroidery thread such as Mettler Metrosene+® Poly Sheen®, Isacord