Bosch NWD-495V03-20P Operating Instructions - Page 27
Install menu
View all Bosch NWD-495V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
FlexiDomeDN IP Camera set-up | en 27 4.3.1 - Press the menu/select (center) key to access the menus or to move to the Up key Menu/select key next or previous menu. Right key - Press the menu/select key for approximately 1.5 seconds to open the Down key Left key Installer menu. - Use the up or down keys to scroll through a menu. - Use the left or right keys to move through options or to set parameters. - When in a menu, quickly pressing the menu/select key twice restores the selected item to its factory default. Install menu Function Selection Description Network Select submenu Select to set the network IP address for the camera (default address is 192.168.0.1) Exit Exit the menu Table 4.1 Install menu Install IP address submenu To operate the camera in your network, a network-valid IP address must be assigned. The IP address can also be set remotely via the Configuration Manager. This SW package is supplied with the camera on the CD. The factory default IP address is 192.168.0.1 Function IP Address Subnet Mask Gateway Exit Description Enter an IP address for the camera. Use LEFT/RIGHT to change position in the address, use UP/DOWN to select the digit. Use SELECT to exit the address edit screen. Enter the Subnet mask (default 255.255.255.0) Enter a Gateway address. Return to the Install menu Table 4.2 IP address submenu Bosch Security Systems Operating Instructions V 1.0 | 2006.12