Bosch NWD-495V03-20P Operating Instructions - Page 33
Image selection, System log / Event log, Saving snapshots, Recording video sequences
View all Bosch NWD-495V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
FlexiDomeDN IP Operation via the browser | en 33 6.1.2 6.1.3 Image selection You can view the image on a full screen. - Click one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or M- JPEG tabs below the video image to switch between the different displays for the camera image. System log / Event log 6.1.4 The System log field contains information about the operating status of the camera and the connection. These messages can be saved automatically in a file. Events such as the triggering or end of alarms are shown in the Event log field. These messages can be saved automatically in a file. Saving snapshots Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's hard drive. 6.1.5 1. Click the camera icon to save single images. 2. The image is saved at a resolution of 704 × 576/480 pixels (4CIF). The storage location depends on the configuration of the camera. Recording video sequences Sections of the video sequence that is currently being shown on the Livepage can be saved on the computer's hard drive. The sequences are recorded at the resolution specified in the encoder configuration. The storage location depends on the configuration of the camera. 1. Click the recording icon to record video sequences. Bosch Security Systems Operating Instructions V 1.0 | 2006.12