Bosch NWD-495V03-20P Operating Instructions - Page 55
Day/Night - fixed ip flexidome camera
View all Bosch NWD-495V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
FlexiDomeDN IP Configuration via the browser | en 55 7.5.3 the maximum value the gain can have during AGC operation (0, 1, ... 26). In FIXED mode the gain is set at a predefined not scene dependent value. Select the gain setting (0, 1, ... 26). Day/Night The Flexidome IP Day/Night camera is equipped with a motorized IR filter. The IR filter can be removed in low-light or IR illuminated applications. There are three different methods of switching: - as part of the programmable mode profile, - automatically, based on the observed light levels, or - via the settings page. If Auto switching mode is selected, the camera automatically switches the filter depending on the observed light level. The switching level is programmable. Set the video level at which the camera switches to monochrome operation (-15 to 0 to +15). In monochrome mode the IR filter is removed, giving full IR sensitivity. In Auto switching mode set the camera priority: - Motion: the camera gives sharp images without motion blur as long as the light level permits. - Color: the camera gives color pictures as long as the light level permits. The camera recognizes IR illuminated scenes to prevent unwanted switching to color mode. There are two modes for IR contrast: Bosch Security Systems Operating Instructions V 1.0 | 2006.12