Bosch NWD-495V03-20P Operating Instructions - Page 75
Number of Destination IP-address
View all Bosch NWD-495V03-20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
FlexiDomeDN IP Configuration via the browser | en 75 Number of destination IP address Here you assign the numbering for the IP addresses to be contacted in the event of an alarm. The unit contacts the remote locations one after the other in the numbered sequence until a connection has been established. Destination IP address For each number, enter the corresponding IP address for the desired remote location. Destination password If the remote location is password protected, enter the password here. Only ten passwords can be defined here. You can define a general password if more than ten connections are required, for example when connections are initiated by a controlling system such as VIDOS or BVMS. The camera connects to all devices protected by the same general password. To define a general password: 1. Select 10 in the Number of Destination IP-address list box. 2. Enter 0.0.0.0 in the Destination IP-address field. 3. Enter the password in the Destination password field. 4. Set the user password of all the devices to be connected to this password. Setting destination 10 to the IP-address 0.0.0.0 overrides its function as the tenth address to try. Destination port Choose the browser-port, depending on the network configuration. Port 443 for HTTPS connections is only available if the On option in SSL encryption is selected. SSL encryption SSL encryption can be used to protect data, such as the password used for establishing a connection. If you select On, only encrypted ports are available for the destination port. SSL encryption must be activated and configured on both sides of a Bosch Security Systems Operating Instructions V 1.0 | 2006.12