Bosch SHV68E13UC Installation Instructions - Page 4
Hot Water Supply Line - Minimum 3/8 O.D. copper tubing or metal
UPC - 825225868354
View all Bosch SHV68E13UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Hammer Hole Saw F r_b) Pipe Wrench Adjustable Wrench Tape Measure Slot Screwdriver Phillips Screwdriver 1-20 Screwdriver Wire Cutter Wire Stripper L©, Level Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors rated 75°C or higher. Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compression fitting, or braided hose). UL listed conduit connector or strain relief is required if you attach the field wiring directly to the terminal block. 4
Hammer
Hole Saw
F
.............................
r_b)
Pipe Wrench
Adjustable
Wrench
Tape Measure
Slot Screwdriver
Phillips
Screwdriver
1-20 Screwdriver
Wire Cutter
Wire Stripper
L©,
Level
Electrical
Supply
Cable - Minimum
#14 AWG,
2 conductor,
1
ground,
insulated copper conductors
rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal
braided dishwasher
supply line.
Shut-off valve and fittings
appropriate
for hot water
supply
line
(copper tubing/compression
fitting, or braided hose).
UL listed conduit connector or strain relief is required if you attach
the field wiring directly
to the terminal block.
4