Brother International 2440C User Guide - Page 39
Getting started, Initial Setup, Setting the Date and Time - reset
UPC - 012502610861
View all Brother International 2440C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2 Getting started Initial Setup Setting the Date and Time When the machine is not in use it will display the date and time. If you set up the Station ID the date and time displayed by your machine will be printed on every fax you send. If there is a power failure, you may have to reset the date and time. No other settings will be affected. 1 Press Menu/Set, 0, 2. 2 Enter the last two digits of the year. Press Menu/Set. 3 Enter two digits for the month. Press Menu/Set. (For example, enter 09 for September, or 10 for October.) 4 Enter two digits for the day. Press Menu/Set. (For example, enter 06 for 6th.) 5 Enter the time in 24-Hour format. Press Menu/Set. (For example, enter 15:25 for 3:25 P.M.) 6 Press Stop/Exit. The LCD now shows the date and time whenever the machine is in Fax mode. Setting Tone or Pulse dialling mode (Except for the Nordic Countries) 1 Press Menu/Set, 0, 4. 2 Press ▲ or ▼ to select Pulse (or Tone). Press Menu/Set. 3 Press Stop/Exit. 2 - 1 GETTING STARTED