Brother International 2440C User Guide - Page 96
Remote commands, two short beeps and you must enter a remote command.
UPC - 012502610861
View all Brother International 2440C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Remote commands Follow the commands below to access features when you are away from the machine. When you call the machine and enter your Remote Access Code (3 digits followed by ), the system will give two short beeps and you must enter a remote command. Remote commands 91 Playing Voice Messages 1 Repeat or Skip Backward 2 Skip Forward 9 STOP Playing 93 Erase all ICM 94 Play and Record OGM in Memory 1 Play 1 TAD Message 2 F/T Message 2 Record 1 TAD Message 2 F/T Message Operation details After one long beep, the machine plays the ICM. Press 1 while listening to an ICM to repeat it. If you press 1 before a message, you will hear the previous message. While playing the ICM, you can skip to the next message. Stop playing the ICM. If you hear one long beep, the erase is accepted. If you hear three short beeps, you cannot erase because all voice messages have not been played, or there are no voice message to erase. * This code erases all recorded messages, not one at a time. The machine plays the selected OGM. You can stop playing OGMs by pressing 9. After one long beep, you can record the selected OGM. You will hear the message played once. You can stop recording the message by pressing 9. REMOTE FAX OPTIONS 6 - 6