Brother International 3450CN User Guide - Page 213
Paper
UPC - 012502601463
View all Brother International 3450CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
PAAPPEERR APPENDIX The printer is designed to work well with most types of xerographic and bond paper. However, some paper variables may have an effect on print quality or handling reliability. Always test samples of paper before purchasing large quantities to ensure that it provides the desired performance. Some important guidelines when selecting paper are: 1. The Supplier should be informed that the paper or envelopes will be used in a laser printer. 2. Preprinted paper must use inks that can withstand the temperature of the printer's fusing process. (200 degrees centigrade) 3. If you have selected a cotton bond paper, paper having a rough surface such as cockle or laid finished paper, or paper that is wrinkled or puckered, be aware that these types of paper may exhibit degraded performance. Note The manufacturer does not warrant the use of any particular paper. The operator is responsible for the quality of paper used with the printer. Paper Types to Avoid Some types of paper might not perform well or may cause damage to your printer. Types of paper to avoid are: 1. Highly textured paper 2. Smooth or shiny paper 3. Paper that is coated or has a chemical finish 4. Damaged, wrinkled or pre-folded paper 5. Paper exceeding the recommend weight specification specified in the manual 6. Paper with tabs and staples 7. Letterheads using low temperature dyes or thermography 8. Multi-part or carbonless paper DAMAGE OR OTHER DEFECTS CAUSED BY THE USE OF PAPER LISTED UNDER "PAPER TYPES TO AVOID" WILL NOT BE COVERED UNDER ANY WARRANTY OR SERVICE AGREEMENTS. A-6