Brother International ADS-2500We Quick Setup Guide - Page 18

For Wireless Network Users (ADS-2500We only) Error Code TS-04 TS-05 TS-06 TS-07 Recommended Solutions The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. For infrastructure mode, change the authentication and encryption methods of the wireless access point/router. Your machine supports the following authentication methods: Authentication Method WPA-Personal WPA2-Personal Open Shared key Encryption Method TKIP AES AES WEP None (without encryption) WEP If your problem is not solved, the SSID or network settings you entered may be incorrect. Confirm the wireless network settings. See How can I find the wireless security information (SSID* and Network Key**)? on page 17. For ad-hoc mode, change the authentication and encryption methods of your computer for the wireless setting. Your machine supports Open authentication method only, with optional WEP encryption. The security information (SSID/Network Key) is incorrect. Confirm the SSID and security information (Network Key). See How can I find the wireless security information (SSID* and Network Key**)? on page 17. If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. The wireless security information (Authentication method/Encryption method/Network Key) is incorrect. Confirm the wireless security information (Authentication method/Encryption method/ Network Key) using the Authentication Method table in error TS-04. See How can I find the wireless security information (SSID* and Network Key**)? on page 17. If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled. To configure your wireless settings using WPS or AOSS™, you must operate both your machine and the wireless access point/router. Confirm that your wireless access point/router supports WPS or AOSS™, and try starting from step 7 on page 16 again. If you do not know how to operate your wireless access point/router using WPS or AOSS™, see the documentation provided with your wireless access point/router, ask the manufacturer of your wireless access point/router, or ask your network administrator. Two or more wireless access points that have WPS or AOSS™ enabled are detected. TS-08 Confirm that only one wireless access point/router within range has the WPS or AOSS™ method active and try again. TS-20 To avoid interference from other access points, after a few minutes, try again starting from step 7 on page 16. The machine is still trying to connect to your wireless network. Please wait a few minutes, and then check the WLAN status. 18