Brother International BAS-705 Instruction Manual - English - Page 15

3. PANEL OPERATION

q

POWER indicator:

w

MODE switch:

e

SELECT switch:

r

CANCEL switch:

t

ENTER switch:

y

RESET switch:

u

BOBBIN switch:

i

FOOT switch:

o

LOOP switch:

!

0

WARNING indicator:

3. PANEL OPERATION

3-1. Explanation of panel

When the power is turned on, the indicator lights to show that the power is on

This switch is used to switch between AUTO mode, HEAD mode and PROGRAM

mode.

During AUTO mode, the

▲

and

▼

SELECT switches are used to switch the

contents of the display.

During PROGRAM mode and ADJUSTMENT mode, the SELECT switches are

used to select items and to input settings.

This switch is used to cancel the changing of a setting or to cancel the selection

of an item.

This switch is used to accept changes made to any of the settings and selection

of items.

This switch is used to reset the machine when an error occurs, and to raise the

presser foot when it has been lowered using the FOOT switch. In addition, it is

used to lock a module which has been unlocked using the BOBBIN switch.

This switch is used to open a module when replacing a bobbin.

This switch is used to lower the presser foot when threading the bobbin thread.

This switch is used to set belt loops.

This indicator illuminates when an error has occurred, and when the MODULE

switch or FOOT switch has been pressed.

―

12

―

BAS-705

NOTE:

The machine will not start while the WARNING indicator is illuminated, even when the START switch is pressed.

After turning on the power, press the START switch to determine the home position.

選択�

SELECT

モード�

MODE

確定�

ENTER

リセット�

RESET

電源�

POWER

取り消し�

CANCEL

警告�

WARNING

BAS-705

u

y

q

!0

r

i

o

t

e

w

�

display

Section	Page
Go to Instruction Manual Top Page	1
1. PART NAMES AND SPECIFICATIONS	4
1-1. Part names	4
1-2. Specifications	4
1-3.Program list	5
2. PREPARATION	6
2-1. Installing the machine	6
2-2.Removing the machine head fixing bolt	7
2-3.Removing the BM support slide shaft fixing screw	7
2-4.Installing the auxiliary legs	8
2-5. Checking the loop cutting	8
2-6. Lubrication	9
2-7.Installing the cotton stand	10
2-8.Using the air unit	11
2-9.Pulley rotation direction	11
2-10. Threading belt loop	12
2-11. Detal on standard data settings	13
2-12. Checking the sewing data	13
2-13. Initializing the sewing data	14
3. PANEL OPERATION	15
3-1. Explanation of panel	15
3-2.Data setting methods	16
4. SEWING	27
4-1. Replacing needle	27
4-2. Threading the upper thread	28
4-3 Winding bobbin thread	29
4-4. Replacing the bobbin case and threading the thread	30
4-5. Sewing conditions and thread tension	31
4-6. Trial sewing	33
4-7. Automatic sewing	35
5. STANDARD ADJUSTMENT（MACHINE HEAD）	38
5-1. Tilting back the machine head	38
5-2. Adjusting the needle bar height	39
5-3. Needle bar lift stroke adjustment	40
5-4. Shuttle driver needle contact adjustment	41
5-5. Needle to shuttle hook point gap adjustment	42
5-6. Adjusting the shuttle hook thread guide	43
5-7. Adjusting the movable knife	43
5-8. Adjusting the thread wiper	48
5-9. Adjusting the width between the needles	49
6. STANDARD ADJUSTMENT (MECHANISMS)	51
6-1. Adjustments required when the belt loop length is changed	52
6-2. Adjustments required when the belt loop width is changed	55
6-3. Adjustments required when the belt loop thickness is changed	58
6-4. Adjusting the looseness of the belt loops	64
6-5. Adjusting the folding margin	65
6-6. Adjusting the folding	66
6-7. Changing the loop cutting shape (V cut or flat cut)	67
6-8. Replacing the movable knife and fixed knife	68
6-9. Adjusting the belt loop and presser foot height	68
7. MAINTENANCE AND INSPECTION	69
7-1.Cleaning the rotary hook	69
7-2.Lubrication	69
7-3.Draining the oil	70
7-4.Cleaning the eye guard	70
7-5.Checking the needle	70
7-6.Cleaning the machine pulley	70
8. DIP SWITCH	71
8-1.Panel DIP switch functions	71
8-2.Main circuit board DIP switch functions	73
9. ERROR CODES	74
10. TROUBLESHOOTING	77
10-1. Machine Head	77
10-2. Mechanisms	82
11. OPTIONS	85
11-1. Hand set switch unit	85
11-2. Upper thread breakage detector assembly	86
11-3. Belt loop slackener	87
11-4. Loop setting sensor	88

Brother International BAS-705 Instruction Manual - English - Page 15

PANEL OPERATION, 3-1. Explanation of panel

Page 15 highlights