Brother International BAS-705 Instruction Manual - English - Page 81
thread trimming., Tension and height
View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
10. TROUBLESHOOTING Problem Cause Check Lower thread breaks at the final stitch. Double cutting during thread trimming. Fixed knife installation position is too close to needle hole. Fixed knife position Thread take-up amount is too large. Incorrect height or tension of thread take-up spring. Thread amount Tension and height of thread take-up spring Remedy Page Adjust the fixed knife installation position to 44 the correct Reduce the thread amount. Decrease the tension or raise the height of the 29 thread take-up spring. ʕ 78 ʕ B A S -705
10. TROUBLESHOOTING
―
78
―
BAS-705
Fixed knife position
Fixed knife installation
position is too close to
needle hole.
Adjust the fixed knife
installation position to
the correct
44
Lower thread breaks at
the final stitch.
Problem
Page
Remedy
Check
Cause
Tension and height of
thread take-up spring
Thread amount
Thread take-up amount
is too large.
Incorrect height or
tension of thread take-up
spring.
Double cutting during
thread trimming.
Decrease the tension or
raise the height of the
thread take-up spring.
29
Reduce the thread
amount.