Brother International BAS-705 Instruction Manual - English - Page 24

3-2-8. X and Y step feed ɾ The sewing pattern can be checked by carrying out step operation. 3. PANEL OPERATION #"4 WARNING POWER Ϧηοτ RESET Ϟʔυ MODE બ୒ SELECT औΓফ͠ CANCEL w ֬ ఆ ENTER ˛ ˛ ˛ AUTO MODE ˗ 2nd bobbin counter Speed Loop length ADJUSTMENT(/) Loop/feed X-Y/program ˗ X-Y/test feed X-Y/TEST FEED(ADJ) ˗ Step feed Real feed STEP FEED/(ADJ) ˛ SW Forward step ˝SW Backward step ( SW fast) e t ˛ 1. Press the MODE switch w to select AUTO mode. 2. While pressing the SELECT switch e, press the MODE switch w. * This will change the mode to ADJUSTMENT mode. 3. Use the ˛
and ˝
SELECT switches e to move the pointer " ˗ " so that "X-Y/test feed" is selected, and then press the ENTER switch t. 4. Use the ˛
and ˝
SELECT switches e again to move the pointer " ˗ " so that "X-Y step feed" is se lected, and then press the ENTER switch t. 5. Press the ˛ or ˝
SELECT switch e. * If the ˛
SELECT switch e is pressed, the machine will operate step by step in the forward direction. * If the SELECT switch e is pressed while the machine is sewing in the forward direction, the opera tion will switch to backward step operation. * If the ˛
SELECT switch e is pressed while the SELECT switch e is being pressed, the operation will switch to high-speed forward step operation. * If the SELECT switch e is pressed while the SELECT switch e is being pressed, the operation will switch to high-speed backward step operation. ˛ ˛ ʕ 21 ʕ B A S -705