Brother International FAX-170 Service Manual - Page 127
determines
![]() |
View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
WSW29 (Function setting 7) Selector No. Function 1 Compression threshold level for voice signals inputted via the network in the built-in TAD 3 operation 4 Compression threshold level for voice signals inputted via the handset in the built-in TAD operation 6 Automatic dialing by caller IDs stored in the memory 8 Beep at the time of full activity report data Setting and Specifications No. 1 2 3 0 0 0 : -47.0 dBm (A) 0 0 1 : -48.5 dBm (B) 0 1 0 : -50.0 dBm (C) 0 1 1 : -51.5 dBm (ID) 1 0 0 : -53.0 dBm (E) 1 0 1 : -54.5 dBm (F) 1 1 0 : -56.0 dBm (G) 1 1 1 : OFF (H) No. 4 5 6 0 0 0 : -44.0 dBm (A) 0 0 1 : -45.5 dBm (B) 0 1 0 : -47.0 dBm (C) 0 1 1 : -48.5 dBm (ID) 1 0 0 : -50.0 dBm (E) 1 0 1 : -51.5 dBm (F) 1 1 0 : -53.0 dBm (G) 1 1 1 : OFF (H) 0: Yes 1: No 0: No 1: Yes • Selectors 1 through 6: Compression threshold level for signals inputted via the network/ handset in the built-in TAD operation (For those models equipped with a built-in TAD) If voice signals inputted via the network or handset are below the level specified by these selectors, the TAD interprets those received voice signals as no signal, compressing the recording time. • Selector 7: Automatic dialing by caller IDs stored in the memory (For those models equipped with a built-in TAD) This selector determines whether or not the automatic dialing function by caller IDs stored in the memory (see the Note below) can be accessed. If it is set to "0," caller IDs stored in the memory can be called up on the LCD by the user function 6-7 and then pressing the Start key when the desired caller ID is displayed dials the caller automatically. (Note: The equipment can store a maximum of the latest 30 incoming caller IDs together with the reception date and time in the memory.) • Selector 8: Beep at the time of full activity report data (For the European versions only) If this selector is set to "1," the equipment will beep when the activity report becomes full (as well as displaying a message on the LCD, prompting the output of the activity report).
![](/manual_guide/products/brother-international-fax170-service-manual-c38febf/127.png)