Brother International FAX-170 Service Manual - Page 96
Brother International FAX-170 Manual
View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
■ Operating Procedure (1) Press the 1 and 0 keys in this order in the initial maintenance mode. The equipment displays the "WSWOO" on the LCD and becomes ready to accept a firmware switch number. (2) Enter the desired number from the firmware switch numbers (01 through 34). The following appears on the LCD: WS1/11XX= 00000000 (3) Use the 44 and ► keys to move the cursor to the selector position to be modified. (4) Enter the desired number using the 0 or 1 key. (5) Press the Set key. This operation saves the newly entered selector values onto the E2PROM and readies the equipment for accepting a firmware switch number. (6) Repeat steps (2) through (5) until the modification for the desired firmware switches is completed. (7) Press the Set or Stop key to return the equipment to the initial maintenance mode. NOTES: • To cancel this operation and return the equipment to the initial maintenance mode during the above procedure, press the Stop key. • If there is a pause of more than one minute after a single-digit number is entered for double-digit firmware switch numbers, the equipment will automatically return to the initial maintenance mode. ■ Note The user-accessible selectors of the firmware switches are shaded in the tables given on the following pages.