Brother International FAX-170 Service Manual - Page 128
operation
View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
WSW30 (Function setting 8) Selector No. Function 1 Detection level of dial tone or I busy tone for the built-in TAD operation 3 4 Not used. 5 Speaker output level 6 I Not used. 8 Setting and Specifications No. 1 2 3 0 0 0 : -38.0 dBm (A) 0 0 1 : -39.5 dBm (B) 0 1 0 : -41.0 dBm (C) 0 1 1 : -42.5 dBm (D) 1 0 0 : -44.0 dBm (E) 1 0 1 : -45.5 dBm (F) 1 1 0 : -47.0 dBm (G) 1 1 1 : -48.5 dBm (H) 0: Higher 1: Lower • Selectors 1 through 3: Detection level of dial tone or busy tone for built-in TAD operation (For those models equipped with a built-in TAD) If dial tone or busy tone inputted during ICM recording is below the level specified by these selectors, the TAD stops recording and disconnects the line. • Selector 5: Speaker output level (For those models equipped with a built-in TAD) This selector determines the speaker output level when the speaker volume switch is set to HIGH or LOW, as listed below. Selector 5 of WSW30 Speaker Volume Switch PositiorN HIGH LOW 0 (Higher) High Medium-Low 1 (Lower) Medium-High Low