Brother International FAX-170 Service Manual - Page 39
mechanism.
![]() |
View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
® Transistor array which consists of seven transistors ®-1: Transistors that control the rotation direction of the motor according to the MM4 through MM1 signals. ®-2: Transistor that turns on and off the solenoid. The combination of the solenoid state and the motor rotation direction determines to which the motor torque should be transmitted, the cutter, the document feeding mechanism, or the paper feeding mechanism. ®-3: Transistor that turns on and off the CR1 relay for switching on and off the +26V power source to the thermal recording head. ®-4: Transistor that turns on and off the CML relay. ® Document front and rear sensor circuitry that is active only while the SEAN signal is on. The LEDs for the sensors are driven by the +26V source. ®-1: PH1, document rear sensor ®-2: PH2, document front sensor III - 27
![](/manual_guide/products/brother-international-fax170-service-manual-c38febf/39.png)