Brother International FAX-170 Service Manual - Page 130
compression.
![]() |
View all Brother International FAX-170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
WSW33 (Function setting 11) Selector No. Function 1 Detection threshold level for voice signals inputted via the network in the built-in TAD 3 operation 4 First communications speed 5 choice for PCI 6 Report output of polled transmission requests 7 Comfortable noise level 8 Setting and Specifications No. 1 2 3 0 0 0 : -42.5 dBm (A) 0 0 1 : -44.0 dBm (B) 0 1 0 : -45.5 dBm (C) 0 1 1 : -47.0 dBm (D) 1 0 0 : -48.5 dBm (E) 1 0 1 : -50.0 dBm (F) 1 1 0 : -51.5 dBm (G) 1 1 1 : -53.0 dBm (H) No. 4 5 0 0 : 14,400 bps 0 1 : 12,000 bps 1 0 : 9,600 bps 1 1 : 7,200 bps 0: YES 1: NO No. 7 8 00 : 01 : 10 : 11 : OFF Low (A) Medium (B) High (C) NOTE: The WSW33 is applicable to those models equipped with a built-in TAD. • Selectors 4 and 5: First communications speed choice for PCI (For those models equipped with a built-in TAD) These selectors are used to set the first communications speed choice with which the equipment attempts to synchronize the data transmission via the PC interface. If the synchronization fails, the equipment automatically steps down to the next lowest speed. • Selector 6: Report output of polled transmission requests This function does not apply in the U.S.A. versions. • Selectors 7 and 8: Comfortable noise level These selectors set the level of noise to be added during playing-back of voice signals recorded with no-signal compression. If they are set to "0, 0," no noise will be added.
![](/manual_guide/products/brother-international-fax170-service-manual-c38febf/130.png)